2-997
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show snmp engineid
show snmp engineid
To display the SNMP local engine ID, use the show snmp engineid command.
show snmp engineid
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If the SNMP engine ID is cleared, the system automatically regenerates a local SNMP engine ID.
The SNMP engine and the SNMP entity have a one-to-one mapping. You can also identify the SNMP
entity, which is represented as hexadecimal numbers only, and must be from 5 to 32 bytes long; for
example, 00:00:00:09:0a:fe:ff:12:97:33:45:12.
Examples This example shows how to display the SNMP engine ID:
Console> (enable) show snmp engineid
EngineId: 00:00:00:09:00:d0:00:4c:18:00
Engine Boots: 1234455
Console> (enable)
Table 2 -78 describes the fields in the show snmp engineid command output.
Related Commands show snmp
Table2-78 show snmp engineid Command Output Fields
Field Description
EngineId String identifying the name of the SNMP copy on the device.
Engine Boots Number of times an SNMP engine has been started or reinitialized.