2-698
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show config
show config
To display the nondefault system or module configuration, use the show config command.
show config [all]
show config [system | mod] [all]
show config acl location
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines To view specific information within the show config output, if you enter /text and press the Return key
at the --More- - prompt, the display starts two lines above the line containing the text string. If the text
string is not found, “Pattern Not Found” is displayed. You can also enter “n” at the --More-- promp t to
search for the last entered text string.
Examples This example shows how to display the nondefault system and module configu ratio n:
Console> (enable) show config
This command shows non-default configurations only.
Use 'show config all' to show both default and non-default configurations.
........
..
begin
!
# ***** NON-DEFAULT CONFIGURATION *****
!
!
#time: Mon Apr 17 2000, 08:33:09
!
#version 5.5(1)
#System Web Interface Version 5.0(0.25)
!
set editing disable
all (Optional) Specifies all module and system configuration information,
including the IP address.
system (Optional) Displays system configuration.
mod (Optional) Displays module configuration.
acl location Displays ACL configuration file location.