2-806
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show mls exclude protocol
show mls exclude protocol
To display excluded protocols on TCP or UDP from being shortcuts, use the show mls exclude protocol
command.
show mls exclude protocol
Syntax Description This command has no arguments.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you enter the show mls exclude protocol command on a switch configured with the
Supervisor Engine 1 with Layer 3 Switching Engine WS-F6K-PFC, MLS exclusion onl y work s in
full-flow mode.
These guidelines apply to switches configured with the Supervisor Engine 2 with Layer 3
Switching Engine II (PFC2):
•The show mls exclude protocol displays the Layer 4 protocols that will not cause a NetFlow entry
to be created automatically but can still be forwarded if a FIB hit occurs.
•MLS exclusion works regardless of the configured flow mask.
Examples This example shows how to display excluded protocols on TCP or UDP from bei ng shor t cuts:
Console> (enable) show mls exclude protocol
Protocol-Port Excluded-From
------------- -------------
89 TCP UDP
5 TCP
10 TCP UDP
122 UDP
Note: MLS exclusion only works in full flow mode.
Console> (enable)
Related Commands clear mls multicast statistics
set mls exclude protocol