2-820
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show module
show module
To display module status and information, use the show module command. For supervisor engines, the
show module command displays the supervisor engine number but appends the uplink daug hte r car d’s
module type and information.
show module [mod]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a module number, all modules are shown.
The MAC addresses for the supervisor engine are displayed in three lines of output. The first line lists
the two MAC addresses for inband ports, the second line lists the two MAC addresses for t he two
gigabit-uplink ports, and the third line lists the allocated 0x3ff MAC address for the chassis backplane.
If you place the MSFC on a supervisor engine installed in slot 1, the n th e MSFC is r ecog ni zed as
module 15. If you install the supervisor engine in slot 2, the M SFC is re cogni zed as modu l e 16.
The slot field in the show module command display is required because submodules, such as the MSM,
reside in the same slot as the supervisor engine module, but are treated as a separate module.
The MSM is referenced by the module number in all other CLI com man ds an d is tr ea te d like any othe r
module.
Examples This example shows how to display status and information for all mo dules :
Console> show module
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC no ok
8 8 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok
9 9 48 10/100BaseTX Ethernet WS-X6348-RJ-45 yes ok
Mod Module-Name Serial-Num
--- ------------------- -----------
1 SAD03436055
15 SAD03432597
9 SAD03414268
mod (Optional) Number of the module.