2-898
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port protocol
show port protocol
To view protocol filters configured on the EtherChannel ports, use the show port protocol command.
show port protocol [mod[/port]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a port value, filters configured on all the ports on the module are shown.
Examples This example shows how to view protocol filters on configured ports:
Console> show port protocol
Port Vlan IP IP Hosts IPX IPX Hosts Group Group Hosts
-------- ---------- -------- -------- -------- --------- -------- -----------
1/1 1 on 0 on 0 on 0
1/2 1 on 0 on 0 on 0
2/1 1 on 3 auto-on 0 auto-on 0
2/2 1 on 0 on 0 on 0
2/3 1 on 0 on 0 on 0
2/4 1 on 0 on 0 on 0
2/5 1 on 0 on 0 on 0
2/6 1 on 0 on 0 on 0
2/7 1 on 0 on 0 on 0
2/8 1 on 0 on 0 on 0
2/9 1 on 0 on 0 on 0
2/10 1 on 0 on 0 on 0
2/11 1 on 0 on 0 on 0
2/12 1 on 0 on 0 on 0
Console>
Related Commands set port protocol
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.