2-355
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set module name
set module name
To set the name for a module, use the set module name command.
set module name mod [mod_name]
Syntax Description
Defaults The default is no module names are configured for any modules.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines If no module name is specified, any previously specified name is cleared.
Use the set module name command to set the module for the MSM. Additional set module commands
are not supported by the MSM.
Examples This example shows how to set the name for module 1 to Superv is or:
Console> (enable) set module name 1 Supervisor
Module name set.
Console> (enable)
Related Commands show module
mod Number of the module.
mod_name (Optional) Name created for the module.