2-772
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show lda
Command Modes Normal.
Usage Guidelines This command is supported only on switches configured with the Supervisor Engine 1 with Layer 3
Switching Engine WS-F6K-PFC (Policy Feature Card).
Entering the destination keyword specifies the entries matching the destination IP address specificat ion,
entering the source keyword specifies the entries matching the source IP address specification, and
entering an ip_addr_spec can specify a full IP address or a subnet address. If you do not specify a
keyword, it is treated as a wildcard, and all entries are displayed.
When entering the ip_addr_spec value, use the full IP address or a subnet address in one of the following
formats: ip_addr, ip_addr/netmask, or ip_addr/maskbit.
Entering the destination keyword specifies the entries matching the destination IP address specificat ion,
entering the source keyword specifies the entries matching the source IP address specification, and
entering an ip_addr_spec can specify a full IP address or a subnet address. If you do not specify a
keyword, it is treated as a wildcard, and all entries are displayed.
Use the following syntax to specify an IP subnet address:
•ip_subnet_addr—This is the short subnet address format. The trail ing deci mal num be r 00 in an IP
address YY.YY.YY.00 specifies the boundary for an IP subnet address. For example, 172.22.36.00
indicates a 24-bit subnet address (subnet mask 172.22.36.00/255.255.25 5.0), and 17 3.2 4.00. 00
indicates a 16-bit subnet address (subnet mask 173.24.00.00/255.255.0.0). However, this format can
identify only a subnet address with a length of 8, 16, or 2 4 bi ts.
•ip_addr/subnet_mask—This is the long subnet address format. For example,
172.22.252.00/255.255.252.00 indicates a 22-bit subnet address. This format can specify a sub net
address of any bit number. To pr ovide more flexibility, the ip_addr value is allowed to be a full host
address, such as 172.22.253.1/255.255.252.00.
•ip_addr/maskbits—This is the simplified long subnet address format. The mask bits specify the
number of bits of the network masks. For example, 172.22.252.00/22 indicates a 22-bit subnet
address. The ip_addr value is allowed to be a full host address, such as 172.22.254.1/22, w hich has
the same subnet address as 172.22.252.00/72.
If you have disabled the ASLB feature, you can view the l ast conf igur ati on usin g th e show lda
uncommitted command.
The short | long options give the flexibility to display the output in regular (80 characters in width) or
wide screen.
If you enter the show lda mls entry or the show lda mls statistics entry command with no keywords
or variables, all entries are displayed.
Examples This example shows how to display committed ASLB information:
Console> (enable) show lda committed
Status:Committed
Local Director Flow:10.0.0.8/ (TCP port 8)
Router MAC:
00-02-03-04-05-06
00-04-56-67-04-05
00-03-32-02-03-03
LD MAC:00-02-03-04-05-06