2-270
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set gvrp
set gvrp
To enable or disable GARP VLAN Registration Protocol (GVRP) globally in the switch or on a per-port
basis, use the set gvrp command.
set gvrp {enable | disable} [mod/port]
Syntax Description
Defaults The default is GVRP is globally set to disabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines When you enable VTP pruning, VTP pruning runs on all the GVRP-disabled trunks.
To run GVRP on a trunk, you need to enable GVRP both globally on the switch and individually on the
trunk.
Examples This example shows how to enable GVRP globally on the switch:
Console> (enable) set gvrp enable
GVRP enabled.
Console> (enable)
This example shows how to disable GVRP:
Console> (enable) set gvrp disable
GVRP disabled.
Console> (enable)
This example shows how to enable GVRP on module 2, port 1:
Console> (enable) set gvrp enable 2/1
GVRP enabled on port 2/1.
Console> (enable)
Related Commands set garp timer
set gvrp timer
show gmrp timer
show gvrp configuration
enable Enables GVRP on the switch.
disable Disables GVRP on the switch.
mod/port (Optional) Number of the module and port on t he mo dul e.