2-539
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set snmp rmon
set snmp rmon
To enable or disable SNMP RMON support, use the set snmp rmon command.
set snmp rmon {enable | disable}
Syntax Description
Defaults The default is RMON support is disabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is not supported by the NAM.
RMON statistics are collected on a segment basis.
The RMON feature deinstalls all of the domains for all of the interfaces on an Ethernet module that has
been removed from the system.
When you enable RMON, the supported RMON groups for Ethernet por ts are Statistics, Hi story , Alar ms,
and Events as specified in RFC 1757.
Use of this command requires a separate software license.
Examples This example shows how to enable RMON support:
Console> (enable) set snmp rmon enable
SNMP RMON support enabled.
Console> (enable)
This example shows how to disable RMON support:
Console> (enable) set snmp rmon disable
SNMP RMON support disabled.
Console> (enable)
Related Commands show port counters
enable Activates SNMP RMON support.
disable Deactivates SNMP RMON support.