2-864
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port cdp
show port cdp
To display the port CDP enable state and the message interval, use the show port cdp command.
show port cdp [mod[/port]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a mod valu e, th e ports on a ll mo dules are sho wn. If you do not sp ecify a port value,
all the ports on the module are shown.
Examples This example shows how to display CDP information for all ports:
Console> show port cdp
CDP : enabled
Message Interval : 60
Hold Time : 180
Version : V2
Port CDP Status
-------- ----------
1/1 enabled
1/2 enabled
Console>
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.