2-617
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set system countrycode
set system countrycode
To specify the country where the system is physically located, use the se t system countrycode
command.
set system countrycode code
Syntax Description
Defaults The default is US (United States).
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines The country code is a two-letter country code taken from ISO-3166 (for example, VA=Holy See [Vatican
City State], VU=Vanuatu, and TF=French Southern Territories).
Examples This example shows how to set the system country code:
Console> (enable) set system countrycode US
Country code is set to US.
Console> (enable)
code Country code; see the “Usage Guidelines” section for format information.