2-855
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show port auxiliaryvlan
show port auxiliaryvlan
To display the port auxiliary VLAN status for a specific port, use the show port auxiliaryvlan
command.
show port auxiliaryvlan {vlan | untagged | dot1p | none}
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is not supported by the NAM.
Examples This example shows how to display the port information for a specific auxiliary VLAN:
Console> (enable) show port auxiliaryvlan
AuxiliaryVlan Status Mod/Ports
------------- -------- ------------------------------------------------------
222 active 8/4-7
333 active 8/13-18
dot1p dot1p 8/23,8/31-34
untagged untagged 9/12
none none 8/1-3,8/8-12,8/19-22,8/24-30,8/35-48,9/1-11,9/13-48
Console> (enable)
This example shows how to display the port information for a specific auxiliary VLAN:
Console> (enable) show port auxiliaryvlan 222
AuxiliaryVlan Status Mod/Ports
------------- -------- ------------------------------------------------------
222 active 8/4-7
Console> (enable)
vlan Number of the VLAN; valid values are from 1 to 4094.
untagged Displays the Cisco IP Phone 7960 that sends untagged packets
without 802.1p priority.
dot1p Displays the Cisco IP Phone 7960 that sends packets with 802.1p
priority.
none Displays the switch that does not send any auxiliary VLAN
information in the CDP packets from that port.