2-104
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear snmp notify
clear snmp notify
To clear the SNMP notifyname in the snmpNotifyTable, use the clear snmp notify command.
clear snmp notify [-hex] {notifyname}
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines If you use special characters for the notifyname value (nonprintable delimiters for this parameter), you
must use a hexadecimal keyword, which is one or two hexadecimal digits separated by a colon (:); for
example, 00:ab:34.
Examples This example shows how to clear an SNMP notifyname from the snmpNotifyTable:
Console> (enable) clear snmp notify joe
Cleared SNMP notify table joe.
Console> (enable)
Related Commands set snmp notify
show snmp notify
-hex (Optional) Displays the notifyname value as a hexadecimal format.
notifyname Identifier to index the snmpNotifyTable.