Reload mode, TM2 | Digi NS9215 specification

S Y S T E M C O N T RO L M O D U L E	. .

Timer 5 Control register..
	.

Register bit

assignment	Bits	Access	Mnemonic	Reset	Description

	D31:19	N/A	Reserved	N/A	N/A

	D18	R/W	Rel mode	0x0	Reload mode
					Initializes the timer and the reload value at terminal
					count. Reload mode is useful in quadrature decoder
					applications, as it allows the reload value to be half
					of he terminal count.
					0 Use the value in the Reload register
					1 Use half the value in the Reload register

	D17:16	R/W	TM2	0x0	Timer mode 2
					00 Mode as set by timer mode 1
					01	Reserved
					10	Reserved
					11	Quadrature decoder/counter mode

	D15	R/W	TE	0x0	Timer enable
					0	Timer disabled
					1	Timer enabled

	D14:12	R/W	Cap Comp	0x0	Capture and compare mode functions
					Applicable only when in 16-bit timer mode.
					000	Normal operation
					001	Compare mode, toggle output on match
					010	Compare mode, pulse output on match
					011	Capture mode, on input falling edge
					100	Capture mode, on input rising edge
					101	Capture mode, on every 2nd rising edge
					110	Capture mode, on every 4th rising edge
					111	Capture mode, on every 8th rising edge
	D11	R/W	Debug	0x0	Debug mode
					0 Timer enabled in CPU debug mode
					1 Timer disabled in CPU debug mode

	D10	R/W	Int Clr	0x0	Interrupt clear
					Clears the timer interrupt. Software must write a 1,
					then a 0 to this location to clear the interrupt.

www.digiembedded.com

167

Page 167

Image 167

NS9215 specifications

The Digi NS9215 is a powerful solution designed for industrial applications that require reliable connectivity and robust performance. Built on a foundation of advanced technologies, the NS9215 serves as a versatile networking device that meets the demands of automation, remote monitoring, and data acquisition.

One of the standout features of the Digi NS9215 is its multi-protocol support. It is capable of handling various communication protocols, including Ethernet, Serial, and Wireless, making it ideal for integration into heterogeneous environments. This flexibility enables users to connect legacy devices to modern networks seamlessly, facilitating smoother data communication across different platforms.

The NS9215 is equipped with powerful processing capabilities, featuring an integrated processor that ensures efficient data handling. This enables the device to perform complex data tasks without compromising performance. Its high-speed connectivity options also allow for rapid data transmission, which is crucial for real-time applications in industrial settings.

Another critical characteristic of the Digi NS9215 is its reliability in harsh environments. Built to withstand extreme temperatures, humidity, and electrical interference, this device assures consistent operation even in challenging conditions. Its rugged design minimizes the risk of failure, making it suitable for deployment in various industrial environments.

Security is a top priority for the Digi NS9215. It comes with advanced security features that protect sensitive data during transmission and prevent unauthorized access. Employing encryption protocols and secure authentication methods, the NS9215 ensures that data integrity and confidentiality are maintained throughout its operation.

The user-friendly interface of the NS9215 allows for easy configuration and management. This ease of use reduces the time required for installation and setup, enabling quick deployment in field operations. Additionally, remote management capabilities enhance operational efficiency, allowing users to monitor device performance and make adjustments from anywhere.

Furthermore, the NS9215 supports extensive scalability options. As organizations grow and evolve, the ability to scale up or adapt the networking capabilities becomes essential. With its modular design, the NS9215 can easily accommodate additional devices and protocols, ensuring longevity and continued relevance in a rapidly changing technological landscape.

In conclusion, the Digi NS9215 is a robust networking device designed for a wide range of industrial applications. Its multi-protocol support, reliability, security features, user-friendly interface, and scalability make it a valuable addition to any industrial network infrastructure, delivering performance and efficiency that businesses can depend on for critical operations.

Contents

90000847C Release date 10 April NS9215 Hardware ReferencePage Page Page Contents A p t e r 3 W o r k i n g w i t h t h e C P U 102 105 A p t e r 4 S y s t e m C o n t r o l M o d u l e 137 141 A p t e r 5 M e m o r y C o n t r o l l e r 203 Sram Bit wide configuration 228 229 Hardware Reference NS9215 HT1 315 A p t e r 7 E x t e r n a l D M a 339 Hardware Reference NS9215 A p t e r 9 I / O H u b M o d u l e 363 Hardware Reference NS9215 A p t e r 1 1 S e r i a l C o n t r o l D u l e H D L C 415 Hardware Reference NS9215 A p t e r 1 4 R e a l T i m e C l o c k M o d u l e 459 A p t e r 1 6 T i m i n g 479 A p t e r 1 7 P a c k a g i n g 513 Hardware Reference NS9215 Heading Description Pinout M o r y b u s i n t e r f a c e Pin Signal Description N O U T 2 6 Sdram CAS Pin SignalH e r n e t i n t e r f a c e M a C Sdram RAS N e r a l p u r p o s e I / O G P I O RXD Uart a DCD Uart aCTS Uart a DSR Uart a Picdbgdataini DCD / TXC Uart CCTS Uart C I2C SCL RXD Uart B DCD Uart BCTS Uart B DSR Uart B TXC / DTR Uart D DSR Uart DRXD Uart D RI Uart D Pin Signal Description PIC1CLKO PIC1CLKI Pin Signal Description PIC0CLKO PIC0CLKI Pin Signal Description Pin Signal Description Pin Signal Description I/O OD S t e m c l o c k System clock drawing S t e m m o d e RTC clock and battery backup drawing Sysmode2 Sysmode1 Sysmode0 Description SPI YES S t e m r e s e t A G T e s t Adcvss POR VSS R a n d b a t t e r y b a c k e d l o g i c GND W e r a n d g r o u n d Power and ground Register address Map Address Description Access Reset valueN t r o l a n d S t a t u s r e g i s t e r s System memory bus I/O control Control and Status registers Bits Mnemonic Description Gpio configuration optionsI O C o n f i g u r a t i o n r e g i s t e r s Address A0902000 Configuration Register #0Configuration Register #1 Bits Access Mnemonic Reset Description Address A090200C Configuration Register #2Configuration Register #3 Address A0902008 Address A0902014 Configuration Register #4Configuration Register #5 Address A0902010 Address A090201C Configuration Register #6Configuration Register #7 Address A0902018 Address A0902024 Configuration Register #8Configuration Register #9 Address A0902020 Address A090202C Configuration Register #10Configuration Register #11 Address A0902028 Address A0902034 Configuration Register #12Configuration Register #13 Address A0902030 Address A090203C Configuration Register #14Configuration Register #15 Address A0902038 Address A0902044 Configuration Register #16Configuration Register #17 Address A0902040 Address A090204C Configuration Register #18Configuration Register #19 Address A0902048 Address A0902054 Configuration Register #20Configuration Register #21 Address A0902050 Address A090205C Configuration Register #22Configuration Register #23 Address A0902058 GPIOAddress A0902064 Configuration Register #24Configuration Register #25 Address A0902060 Address A0902068 Configuration Register #26 Address A090206C I O C o n t r o l r e g i s t e r sGpio Control Address A0902070 Address A0902074 Address A0902078 Address A0902080 I O S t a t u s r e g i s t e r sGpio Status Address A0902084 Address A090208C M o r y B u s C o n f i g u r a t i o n r e g i s t e rAddress A0902088 CS3 CS0CS1 CS2 High data bus pullup control Apudis Memory Bus Configuration register About the processor Working with the CPU ARM instruction set Thumb instruction set Process block DiagramS t r u c t i o n s e t s Arm926EJ-S ARM926EJ-S system addresses Address manipulation example Accessing CP15 registersJava instruction set For reads Terms and abbreviationsMnemonics for these instructions are Term Abbreviation Description TLB Be ZERO, does not cause any physical damage to the chipRegister summary Register Reads Writes Any value other than 1 or 2. Note this example This is the contents of the ID code registerWriting to register R0 is Unpredictable R0 ID code Field Description Cache type register and field descriptionDsize and Isize fields Field contains these bits Len field Cache line length O n t r o l r e g i s t e rSize field Cache size Assoc field Associativity Bits Name Function Control registerBit functionality Behavior ICacheDCache behavior Cache O m a i n a c c e s s C o n t r o l r e g i s t e r CRm and opcode2 fields should be Zero when writing to R2Access permissions and instructions R a n s l a t i o n T a b l e B a s e r e g i s t e r Register bits Fault S t a t u s r e g i s t e r sAccess instructions E g i s t e r Priority Source Size Status Domain Fault a d d r e s s r e g i s t e rStatus and domain fields Function Description A c h e O p e r a t i o n s r e g i s t e r MVA Cache operation functionsFunction/operation Data format Instruction Modified virtual address format MVA Set/Way format Set/Way example Test and clean DCache instructions Operation Data Instruction Test, clean, and invalidate DCache instructionL B O p e r a t i o n s r e g i s t e r Unpredictable That allows you to control each cache way independently A c h e L o c k d o w n r e g i s t e rModified virtual address format MVA Cache ways Modifying the Cache Lockdown register Register format AccessInstruction or data lockdown register Instructions For each of the cache lines to be locked down in cache way Which region the TLB entry is placed Cache unlock procedure0 T L B L o c k d o w n r e g i s t e r Bit Use these instructions to program the TLB Lockdown register 1 a n d R 1 2 r e g i s t e r s3 P r o c e s s I D r e g i s t e r Programming instructions Sample code sequence Function Data ARM instruction Fcse PID register Access instructionsPerforming a fast context switch Register format This is the format of the Fcse PID register 5 T e s t a n d d e b u g r e g i s t e r Context ID register Access instructionsAccessing reading or writing this register is reserved 4 r e g i s t e r Protection scheme MMU FeaturesM o r y M a n a g e m e n t U n i t M M U State space servo control Access permissions and domains Translated entries Register Bits Description MMU program accessible registers Address translation TTB register Format Translation table base First-level fetch Table walk process Table descriptors First-level fetch concatenation and addressFirst-level descriptor Value Meaning Description Section descriptor FormatBits Section Coarse Fine Description Bits Description Section descriptor Bit descriptionFine page table Descriptor 113 Second-level descriptor pages Second-level descriptor Second-level descriptor format Bits Large Small Tiny Description Second-level descriptor bit assignmentsSecond-level descriptor least significant bits Translation sequence for large page references Translating sequence for small page references More information Translation Sequence for tinyReferences Level descriptor U Fault s a n d C P U a b o r t s Transfers Priority encoding table Fault Address register FARDomain Fault Address register FAR values for Multi-word M a i n a c c e s s c o n t r o l Compatibility issuesSpecifying access permissions Interpreting access permission bits Privileged permissions User permissions Fault c h e c k i n g s e q u e n c e No access 00 Reserved Check domain status Fault checking sequence Enabling T e r n a l a b o r t sA b l i n g a n d d i s a b l i n g t h e M M U Disabling B s t r u c t u r e C h e s a n d w r i t e b u f f e r Cache features Write buffer Enabling the caches DCache Bit settingsSettings R1 register C and M bits for DCache Description ARM926EJ-S behavior Table C Table B Bit C h e M V a a n d S e t / W a y f o r m a t s Generic, virtually indexed, virtually addressed cache Cache format ARM926EJ-S Self-modifying code N c a c h a b l e i n s t r u c t i o n f e t c h e sThis figure For example, with a 4-way cache a = AHB behavior Instruction Memory Barrier Sample IMB sequences Noncachable instruction fetches S i n t e r c o n n e c t i o n Features S t e m b u s a r b i t e r Locked bus sequence Relinquishing the bus OwnershipUntil the transaction completes Master will not occupy the system bus Split transfers Arbiter configuration example Address range Size System functions D r e s s d e c o d i n g Master Name Hmaster30 assignment Software watchdog timerO g r a m m a b l e t i m e r s Source clock frequency Gptc characteristics Control fieldN e r a l p u r p o s e t i m e r s / c o u n t e r s S i c P W M f u n c t i o n Bit mode options Sample enhanced PWM waveform H a n c e d P W M f u n c t i o nA d r a t u r e d e code r f u n c t i o n CCW Input signalsNC No change CW Clockwise CCW Counter clockwise Err Error Quadrature Encoding truth Digital filter Testing signalsTimer support Monitors how far the encoder has moved Typical application Vector T e r r u p t c o n t r o l l e rFIQ interrupts IRQ interrupts IRQ FIQ IRQ characteristics Interrupt sources Interrupt ID Interrupt source Interrupt sources are assigned as shown L c o n f i g u r a t i o n N f i g u r a b l e s y s t e m a t t r i b u t e s O t s t r a p i n i t i a l i z a t i o n PLL configuration and control system block diagramConfiguring the powerup settings Pin name Configuration bits Offset 3124 2316 158 S t e m c o n f i g u r a t i o n r e g i s t e r s 155 Isaddr System Memory Chip Select 0 Dynamic Memory Mask Register N e r a l a r b i t e r C o n t r o l r e g i s t e rC 0 , B R C 1 , B R C 2 , a n d B R C 3 r e g i s t e r s Address A090 This is how the channels are assigned in the four registers B Error D e t e c t S t a t u sChannel enable bit Channel allocation Register Register bit assignment EDS1 Address A090 001C Transaction type write or read Not reset CPU instruction errorNot reset CPU data error Not reset AHB error response EIC AHB Error Interrupt ClearAHB Slave Error Response Detect Config M e r M a s t e r C o n t r o l r e g i s t e r Timer 8 reload step enable Timer 9 reload step enableTimer 9 low step enable Timer 9 high step enable Addresses A090 0190 / 0194 / 0198 / 019C / 01A0 M e r 0 4 C o n t r o l r e g i s t e r s Timer clock select Timer enableCapture and compare mode functions Debug mode Address A090 01A4 M e r 5 C o n t r o l r e g i s t e r TM2 Reload mode Addresses A090 01A8 / 01AC / 01B0 / 01B4 M e r 6 9 C o n t r o l r e g i s t e r s D3118 Reserved D1716 M e r 6 9 H i g h r e g i s t e r s M e r 6 9 L o w r e g i s t e r s High step M e r 6 9 H i g h a n d L o w S t e p r e g i s t e r sM e r 6 9 R e l o a d S t e p r e g i s t e r s High step direction Reload step Reload step direction M e r 0 9 R e a d a n d C a p t u r e r e g i s t e r Register 3124 2316 1508 0700 Individual register mappingInterrupt Vector Address register Interrupt type Interrupt enableA D D R r e g i s t e r Invert ISA Interrupt service routine addressT e r r u p t S t a t u s a c t i v e Interrupt status active Israw T e r r u p t S t a t u s R a wF t w a r e W a t c h d o g C o n f i g u r a t i o n Address A090 016C Software watchdog interrupt clear Software watchdog enableSoftware watchdog timer clock select F t w a r e W a t c h d o g T i m e r Address A090 017C Watchdog timerO c k C o n f i g u r a t i o n r e g i s t e r Memory clock out Clock scale controlMax clock scale control CPU clock select Ethernet MAC D u l e R e s e t r e g i s t e rIO hub I2C Module Reset register resets each module on the AHB busReset status RST Stat Miscellaneous System Configuration and Status register Internal register access mode bit Boot modeEndian mode Misaligned bus address response mode PLL bypass L C o n f i g u r a t i o n r e g i s t e rPLL frequency formula Register Register bit assignment Interrupt ID W e r M a n a g e m e n tAddress A090 018C Intid Sdram self refresh control Deprecated Chip sleep enableNew designs should not use this bit Hardware clock scale control SPI wakeup CPU wake interrupt clearRTC wakeup I2C wakeup Addresses A090 01D0 / 01D4 B B u s a c t i v i t y S t a t u sAddress A090 022C Chip select 0 base Chip select 0 disableRegisters Addresses A090 01D8 / 01DC Chip select 1 base Chip select 1disableAddresses A090 01E0 / 01E4 Chip select 2 base Chip select 2 disableAddresses A090 01E8 / 01EC Chip select 3 base Chip select 3 disableAddresses A090 01F0 / 01F4 Chip select 0 mask Addresses A09001F8 / 01FC Addresses A090 0200 Chip select 1 disable Addresses A090 0208 / 020C N I D r e g i s t e r CLR GenidSTS Status Polarity RTC standby mode statusC M o d u l e C o n t r o l r e g i s t e r RTC Module Control register controls the RTC module RTC clock ready interrupt clear RTC standby modeRTC clock ready interrupt status RTC module interrupt status RTC Module Control register Amba 32-bit AHB compliancy Memory controller provides these featuresWith and without asynchronous page mode Static memory features, such as W p o w e r o p e r a t i o n M o r y m a p Power-on reset memory map Example Boot from flash Sdram remapped after boot Sram Device Write protect Mode BufferA t i c m e m o r y c o n t r o l l e r ROM Be aware Write protection Extended wait transfers Memory mapped peripherals Access sequencing and memory width Wait state generationA t i c m e m o r y i n i t i a l i z a t i o n ROM, SRAM, and Flash Programmable enableOutput enable programmable delay A t i c m e m o r y r e a d c o n t r o l WAITRD2 WAITOEN0 WAITPAGEN/A WAITWRN/A External memory read transfer with zero wait statesExternal memory read transfer with two wait states Timing parameter Value WAITENN/A WAITTURNN/A External memory read transfers with zero wait states Burst of two wait states with fixed length Burst of zero wait states with fixed length Y n c h r o n o u s p a g e m o d e r e a d External memory page mode read transfer WAITRD0 WAITOEN0 WAITPAGE0 WAITWRN/A WAITWENN/A WAITTURNN/A External memory 32-bit burst read from 8-bit memoryWAITRD2 WAITOEN0 WAITPAGE1 WAITWRN/A WAITWENN/A WAITTURNN/A Timing parameters Value External memory write transfer with zero wait states Write enable programming delayA t i c m e m o r y w r i t e c o n t r o l Wait states added between external read and write transfers External memory write transfer with two wait states WAITRDN/A WAITOENN/A WAITPAGEN/A WAITWR0 WAITWEN0 WAITTURN0 WAITRD0 WAITOEN0 WAITPAGEN/A WAITWR0 WAITWEN0 WAITTURN0 S t u r n a r o u n dS t u r n a r o u n d T i m i n g a n d p a r a m e t e r s Read followed by write with no turnaround Read followed by a write with two turnaround cycles Write followed by a read with no turnaround WAITRD0 WAITOEN0 WAITPAGEN/A WAITWR0 WAITWEN0 WAITTURN2 T e l a n e c o n t r o l D r e s s c o n n e c t i v i t y Memory banks constructed from 16-bit memory Memory banks constructed from 16-or 32-bit memory devices 2Mx32 ROM R a M I n i t i a l i z a t i o n Access sequencing and memory widthN a m i c m e m o r y c o n t r o l l e r Bit Parameter Parameter description Device size Configuration Load Mode register left shiftLeft-shift value -bit wide data bus Sdram RBC 256M 8M x 16M x 32M x 512M 64M x Left-shift value -bit wide data bus Sdram BRC Bit wide ConfigurationSignal 16M device 64M device 128M 256M 512M Device Signal BA1 BA0 Address Register Description G i s t e r sRegister map Only. Bursting is not allowed TRWL, tRDL Address A070 Reset valuesN t r o l r e g i s t e r Address mirror Bits Access Mnemonic DescriptionLow-power mode Memory controller enable Write buffer status A t u s r e g i s t e rN f i g u r a t i o n r e g i s t e r Self-refresh acknowledge Srefack END N a m i c M e m o r y C o n t r o l r e g i s t e r Self-refresh request Srefreq Sync/Flash reset/power down signal dypwrnDynamic memory clock enable Sdram initialization Refresh Refresh timer Read data strategy RAS Precharge command period tRPActive to precharge command period tRAS Self-refresh exit time tSREX Address A070 003CSrex APR Last-data-out to active command time tAPR DAL Data-in to active command tDAL or tAPW Address A070 004C Active to active command period tRC Period Auto-refresh period and auto-refresh to active commandRFC XSR Exit self-refresh to active time command MRD Load mode register to Active Command TimeRRD Active Bank a to Active Bank B Address A070 0100 / 0120 / 0140 External wait timeoutA t i c M e m o r y E x t e n d e d W a i t r e g i s t e r Example AM1 Write protectBdmc Address mapping 119 Description Memory ConfigurationAddress mapping For the Dynamic For a chip select connected to Select this mapping Address A070 0104 / 0124 / 0144 Do not modify RAS latency active to read/write delayCAS CAS latency Extended wait Buffer enablePsmc Bsmc Mode Byte lane stateChip select polarity Memory width Burst modeBmode Wwen Wait write enable WaitwenWait output enable Waitoen Address A070 0208 / 0228 / 0248 Wtrd Nonpage mode read wait states or asynchronous page modeRead first access wait state Waitrd A t i c M e m o r y R e a d D e l a y 0 3 r e g i s t e r s Wtpg Asynchronous page mode read after the first wait state Write wait states Waitwr Address A070 0218 / 0238 / 0258Wtwr Bus turnaround cycles Waitturn Wttn StaticMemory Turn Round Delay 0-3 registers Ethernet Communication Module Features Common acronyms Ethernet communications module H e r n e t M a C Feature Description MAC module block diagram Features Media Independent Interface A t i o n a d d r e s s l o g i c S a LPHY interface mappings Station address logic MAC receiver A t i s t i c s m o d u l e Receive packet processor H e r n e t f r o n t e n d m o d u l eEthernet front- end module EFE Transmit packet processor C e i v e p a c k e t p r o c e s s o r Receive buffer descriptor format description Transferring a frame to system memoryReceive buffer descriptor format Receive buffer descriptor field definitions A n s m i t p a c k e t p r o c e s s o r Definitions Transmit buffer descriptor formatTransmit buffer Descriptor field Transmitting a frame Unsuccessfully FrameTransmitted Successfully Interrupt condition Description H e r n e t s l a v e i n t e r f a c eT e r r u p t s Status bits Bit field Register Active Default Modules reset StateS e t s Multicast address filtering example L t i c a s t a d d r e s s f i l t e r i n gFilter entries Multicast address Filter registers Writing to other registers O c k s y n c h r o n i z a t i o nMulticast address Filtering example Register address Filter Txptr RxdptrEintr Eintren Address A060 H e r n e t G e n e r a l C o n t r o l R e g i s t e r # Accept short 64 receive frames Enable RX packet processingEnable receive DMA Enable TX packet processing Erxinit Enable transmit DMAEnable initialization of RX buffer descriptors Etxdma Insert transmit source address MAC host interface soft resetRX Fifo RAM access Align RX data H e r n e t G e n e r a l S t a t u s r e g i s t e r RX initialization complete H e r n e t T r a n s m i t S t a t u s r e g i s t e rRxinit TX abort late collision Frame transmitted OKBroadcast frame transmitted Multicast frame transmitted Address A060 001C H e r n e t R e c e i v e S t a t u s r e g i s t e r Receive multicast frame Receive frame size in bytesReceive frame OK Receive broadcast frame C C o n f i g u r a t i o n R e g i s t e r # Excess deferral Receive enableBits Access Mnemonic Reset Definition Internal loopback CRC enable Auto detect pad enableVlan pad enable Pad/CRC enable Type C k t o B a c k I n t e r P a c k e t G a p r e g i s t e rPAD operation Table for transmit Frames Back-to-back inter-packet-gap Full-duplex modeHalf-duplex mode Address A060 040C Non back-to-back inter-packet-gap part L l i s i o n W i n d o w / R e t r y r e g i s t e rAddress A060 IPGR1 Retx X i m u m F r a m e r e g i s t e rCwin Collision window Rmiim Reset MII management blockMaximum frame length Suppress preamble Clocks field SettingsI M a n a g e m e n t C o m m a n d r e g i s t e r Clock select Automatically scan for read data I M a n a g e m e n t a d d r e s s r e g i s t e rRegister bit If both Scan and Read are set, Scan takes precedence Address A060 042C I M a n a g e m e n t W r i t e D a t a r e g i s t e rI M a n a g e m e n t R e a d D a t a r e g i s t e r MII link failure I M a n a g e m e n t I n d i c a t o r s r e g i s t e rMII read data Miilf Automatically scan for read data in progress A t i o n a d d r e s s r e g i s t e r sRead data not valid Nvalid Station Address Register #2 A t i o n a d d r e s s F i l t e r r e g i s t e rRegister bit assignments for all three registers Station Address Register #1 PRA G i s t e r H a s h T a b l e sPRO PRM TR1K A t i s t i c s r e g i s t e r sAddress Register Transmit and receive counters Address Register Receive counters Receive statistics Counters addressReceive byte counter A060 069C Receive packet counter A060 06A0 Rbuo Receive FCS error counter A060 06A4Receive multicast packet counter A060 06A8 Receive broadcast packet counter A060 06AC Receive undersize packet counter A060 06CC Receive alignment error counter A060 06BCReceive code error counter A060 06C4 Receive carrier sense error counter A060 06C8 Address Register Transmit counters Receive jabber counter A060 06D8Transmit statistics counters address map Transmit byte counter A060 06E0 Transmit packet counter A060 06E4 Transmit excessive collision packet counter A060 Carry Register Transmit oversize frame counter A060Transmit undersize frame counter A060 These are the General Statistics registers C1RPK C1MAXC1MGV C1RBY Mask register M1RFC M1MGVM1RBY M1RPK Mask register Register Address A060 073C RXB Buffer Descriptor Pointer Address A060 0A040x00000000 RXA Buffer Descriptor Pointer RXD Buffer Descriptor Pointer Address A060 0A08Address A060 0A0C RXC Buffer Descriptor Pointer Rxbufc H e r n e t I n t e r r u p t S t a t u s r e g i s t e rAddress A060 0A10 Rxovflstat Rxnobuf RxdonebRxdonec Rxdoned Address A060 0A14 H e r n e t I n t e r r u p t E n a b l e r e g i s t e r Address A060 0A18 Address A060 0A20 Address A060 0A1C Address A060 0A24 Address A060 0A28 Address A060 0A30 Address A060 0A2C Address A060 0A38 Address A060 0A34 Rxfreec F r e e B u f f e r r e g i s t e rAddress A060 0A3C Rxfreed L t i c a s t a d d r e s s F i l t e r r e g i s t e r s Address A060 0A64 Address A060 0A58Address A060 0A5C Address A060 0A60 L t i c a s t a d d r e s s M a s k r e g i s t e r s Address A060 0A9C Address A060 0A90Address A060 0A94 Address A060 0A98 Address A060 0AC0 Address A060 0AB4Address A060 0AB8 Address A060 0ABC Offset+0 B u f f e r D e s c r i p t o r R a M Address A060 2000 512 locations Offset+4Offset+8 Offset+C M p l e h a s h t a b l e code Pointer to buffer to store hash table Pointer to hash table 337 Sample hash table code A t r a n s f e r s External DMA Destination DMA buffer descriptor diagramA b u f f e r d e s c r i p t o r Source address pointer Buffer length S c r i p t o r l i s t p r o c e s s i n g Variable Definition Use this equation to compute total access timeR i p h e r a l D M a r e a d a c c e s s Determining the width of Pden Equation variables R i p h e r a l D M a w r i t e a c c e s s Peripheral DMA single read accessPeripheral DMA burst read access Logic remains paused until the REQ signal is reasserted Peripheral DMA burst write accessREQ signal REQ signal Register name Field Value Comment Done signal Special circumstancesStatic ram chip select configuration A t i c R a M c h i p s e l e c t c o n f i g u r a t i o n A B u f f e r D e s c r i p t o r P o i n t e r A C o n t r o l r e g i s t e r Destination width Channel enableChannel go Source width Source address increment Fly-by modeDestination burst Index ResetState Channel abort interrupt pending Error completion interrupt pendingNormal completion interrupt pending Buffer not ready interrupt pending A P e r i p h e r a l C h i p S e l e c t r e g i s t e r Chip select SEL DMA Peripheral Chip Select register Supports ECB, CBC, OFB, CTR, and CCM cipher modes AESProcesses 32 bits at a time Is programmable for 128-, 192-, or 256-bit key lengths Data blocks Block diagramKey size Characteristic 128 192 256 S D M a b u f f e r d e s c r i p t o r Destination buffer length AES buffer descriptor diagramSource address pointer Source buffer length Interrupt I bit Last L bit Full F bit AES op code B p r o c e s s i n g C r y p t i o n M m o d e CCM mode does not require an initialization vectorC , C F B , O F B , a n d C T R p r o c e s s i n g Bits ContentsNonce buffer CCM mode Hub Module Servicing RX and FIFOs A c o n t r o l l e rAHB slave Interface Control12 F Source address pointer Buffer length Control15 WControl14 Control13 L Status150 Control110 Pointer and Index A n s m i t D M a e x a m p l eNot applicable Process System Memory Visual example Register Offset Description ReservedUart a register Address map Uart B register Address map Uart D register Address map Uart C register Address map I2C register Address map SPI register Address mapAD register Address map Reserved IO register Address map RTC register Address mapIO Hardware Assist register Channel abort interrupt pending RX Error completion interrupt pending RXNormal completion interrupt pending RX Buffer not ready interrupt pending RX RX Fifo overflow interrupt pending RX Fifo service request interrupt pendingError completion interrupt pending TX TX Fifo service request interrupt pending D u l e D M a R X C o n t r o l Direct Channel abortFlex I/O RX Fifo threshold RxbdpRxthrs D u l e D i r e c t M o d e R X S t a t u s F I F O Full flag D u l e D i r e c t M o d e R X D a t a F I F O Indexen D u l e D M a T X C o n t r o l Txbdp TX Fifo threshold D u l e D i r e c t M o d e T X D a t a F I F O Txdl D u l e D i r e c t M o d e T X D a t a L a s t F I F OTXD 384 DMA transfers to and from system memory Modem control signal supportReceive error conditions Character gap timeout Control register Field Value Comment Example configurationR m a l m o d e o p e r a t i o n Uart module structure Divisor Baud rate U d r a t e g e n e r a t o rBaud rates This table shows the baud rates achieved with CLKref set to R c e d c h a r a c t e r t r a n s m i s s i o n R d w a r e b a s e d f l o w c o n t r o l M w a k e u p o n c h a r a c t e r r e c o g n i t i o n Force character transmission procedure Collecting feedback DLAB=1 A p p e r C o n t r o l a n d S t a t u s r e g i s t e r sAddress Register DLAB=0 Dtren A p p e r C o n f i g u r a t i o n r e g i s t e rRtsen RTS RTS control SoftwareReceive character-based flow control Remote loopback RS485 transceiver assertion control Enable force completeT e r r u p t E n a b l e r e g i s t e r RS485 transceiver deassertion control Enable line break Enable overflow errorEnable parity error Enable frame error T e r r u p t S t a t u s r e g i s t e r Force complete Parity errorFrame error Uart interrupt Character match1 Ring indicatorCharacter match3 Character match2 Write this field to Enable receive character gap timerTransmit idle Receive idle C e i v e B u f f e r G a P C o n t r o l r e g i s t e r Enable transmit bit rate generation Data Enable character matchMask FLOW4 Flow control enableFlowstate Flow control state FLOW2 Char Force transmit enableM W a k e u p C o n t r o l r e g i s t e r Read-only busy Txcount EnableA n s m i t B y t e C o u n t Address 90011034 / 90019034 / 90021034 Rbuff R T R e c e i v e B u f f e rR T T r a n s m i t B u f f e r Brdl R T B a u d R a t e D i v i s o r L S BR T B a u d R a t e D i v i s o r M S B Tbuff Edssi Enables modem status interruptR T I n t e r r u p t E n a b l e r e g i s t e r Brdm Interrupt identification Enables receive line status interruptEnables transmit holding register empty interrupt Enables receive data available interrupt Clear all bytes in the TX Fifo Enable the TX and RX FifoR T F I F O C o n t r o l r e g i s t e r R T L i n e C o n t r o l r e g i s t e r Stick parity, operates as follows Divisor latch access bitParity enable Set break, if set TX data is set to Automatic flow control Local loopback enable bitR T M o d e m C o n t r o l r e g i s t e r R T L i n e S t a t u s r e g i s t e r R T M o d e m S t a t u s r e g i s t e r Delta CTS indicator Delta DCD indicatorTrailing edge of RI indicator Delta DSR indicator Uart Modem Status register Hdlc module structure C e i v e a n d t r a n s m i t o p e r a t i o n s Transmitter underflow O c k i n gT s Transmit operation Last byte bit pattern Valid data T a e n c o d i n gLast byte bit Pattern table Encoding examples Transitions Dpll operation Adjustment ranges and output clocks NRZ and Nrzi encoding Biphase-Level encoding CLK Address Received or a buffer close event occurs, such as end Local loopback Enable Hdlc interruptEnable invalid CRC Enable valid CRC Rabort Enable receive abort error Valid CRC Receive abort errorHdlc interrupt Invalid CRC Hdata L C D a t a R e g i s t e r Hdata Clock source L C C o n t r o l R e g i s t e rHmode L C C l o c k D i v i d e r L o w Divl L C C l o c k D i v i d e r H i g hAddress 9002911C Divh Clock enable Interface SPI module Four-wire interface RXD, TXD, CLK, CSProgrammable SPI mode 0, 1, 2, or Master mode internal diagnostic loopback SPI module structure I c o n t r o l l e r Capture edge Drive edge Timing modes Clocking mode diagramsSPI mode SPI CLK Idle I c l o c k i n g m o d e s Clock generation samples SPI master mode SPI slave modeI c l o c k g e n e r a t i o n S t e m b o o t o v e r S P I o p e r a t i o n Entry Name Bootmode10 Address widthAvailable Strapping options EEPROM/FLASH header Entry Name Description Time to completion I C o n t r o l a n d S t a t u s r e g i s t e r s Configuration registers for the SPI module are located atThis is the primary SPI Configuration register Enable master loopback mode Discard bytes SPI modeSlave enable O c k G e n e r a t i o n r e g i s t e r Use this register to define the data rate of the interface Bits Access Mnemonic Reset DivisorEnable clock generation Register programming steps D3102 Not used Write this field to D01 Parm Description Min Max Unit I t i m i n g c h a r a c t e r i s t i c sSPI master timing Parameters SPI master timing diagram SPI slave timing parameters SPI slave timing diagram SPI timing characteristics Overview Interface timing, data structure, and error handlingY s i c a l I 2 C b u s I2C bus Slave Description Addres Bit E x t e r n a l a d d r e s s e s C o m m a n d i n t e r f a c e Command Name Description RegisterDescription R e g i s t e r sM m a n d T r a n s m i t D a t a r e g i s t e r Address 9005 Provide new transmit data A t u s R e c e i v e D a t a r e g i s t e r2C Dlen port iicdlen Irqcd S t e r a d d r e s s r e g i s t e rScmdl Mcmdl A v e a d d r e s s r e g i s t e r Mask the interrupt to the ARM CPU irqdis Address 9005 000CTiming parameter for fast-mode Register Code Name Master/slave Description T e r r u p t codesMaster/slave interrupt codes I2C master software driver I2C slave high level driver F t w a r e d r i v e r Master module normal mode, 16- bit O w c h a r t s Slave module normal mode, 16- bit Real Time Clock Module Address 9006 C G e n e r a l C o n t r o l r e g i s t e r Time date, hour, minute, second operation 12/24 clock mode operation2 4 H o u r r e g i s t e r Calendar operation HRU M e r e g i s t e rHRT Address 9006 000C L e n d a r r e g i s t e r M e Alarm r e g i s t e r Alarm E n a b l e r e g i s t e r L e n d a r Alarm r e g i s t e r Address 9006 001C E n t F l a g s r e g i s t e r Hour event Alarm eventMonth event Date event Hour interrupt Alarm interruptMonth interrupt Date interrupt T e r r u p t D i s a b l e r e g i s t e r T e r r u p t E n a b l e S t a t u s r e g i s t e r Address 9006 002C N e r a l S t a t u s r e g i s t e r General Status register Structure ADC module ADC control block C D M a p r o c e d u r e C C o n f i g u r a t i o n r e g i s t e r ADC configuration registers are located at offsetC c o n t r o l a n d s t a t u s r e g i s t e r s ADC channel select DMA enableInterrupt status Wait C C l o c k C o n f i g u r a t i o n r e g i s t e rC O u t p u t R e g i s t e r s 0 Dout Absolute maximum ratings Parameter Symbola Rating UnitE c t r i c a l c h a r a c t e r i s t i c s Recommended operating conditions Parameter Symbol a Rating UnitCPU / Memory clock Power Sym Parameter Conditiona Value Unit E l e c t r i c a l c h a r a c t e r i s t i c sInputs Sym Parameter Value Unit Ouputs SN74LVC1G17DC Manufacturer Part Number DescriptionNC7SP17 74LVC1G17GW M o r y T i m i n g Sdram burst read 16-bit Sdram burst read 16 bit, CAS latency = Sdram burst write 16 bit Sdram burst read 32 bit Sdram burst read 32 bit, CAS latency = Sdram burst write 32-bit Sdram load mode Sdram refresh mode Clock enable timing Parm Description Min Max Unit Static RAM read cycles with 0 wait states Static RAM asynchronous page mode read, Wtpg = Static RAM read cycle with configurable wait states Static RAM sequential write cycles Static RAM write cycle Static write cycle with configurable wait states CPU Slow peripheral acknowledge timing Slow peripheral acknowledge write Slow peripheral acknowledge read Ethernet MII timing Ethernet timing I2C timing Standard Mode Fast Mode Parm Description Min Max Unit SPI slave parameters SPI TimingParm Description Min Max Unit Mod Not SPI master parameters Tbclk *8 SPI master mode2 and 3 2-byte transfer SPI master mode 0 and 1 2-byte transfer SPI slave mode 2 and 3 2-byte transfer SPI slave mode 0 and 1 2-byte transfer Parm Description Min Typ Unit S e t a n d h a r d w a r e s t r a p p i n g t i m i n g A G t i m i n g System PLL reference clock Timing Diagram below pertains to clock timingO c k t i m i n g Clock timing C k a g e Packaging O c e s s o r D i m e n s i o n s C K a G I N G Processor Dimensions V i s i o n C V i s i o n B

Digi NS9215 manual Reload mode, TM2

Models: NS9215

Register bit

Bits

Reload mode

TM2

Timer mode 2

Timer enable

Capture and compare mode functions

Debug mode

Interrupt clear

NS9215 specifications