Digi NS9215 manual E n t F l a g s r e g i s t e r, Address 9006 001C

R E A L TI M E C L O C K M O D U L E

Event Flags register

Register

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
							Reserved
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				Reserved						Mnth	Date	Hour	Min	Sec	Hsec

Register bit

assignment	Bits	Access	Mnemonic	Reset	Description
	D31:06	N/A	Reserved	N/A	N/A
	D05	R/W	Mnth	0x0	Month
					0	Disable the month event
					1	Enable the month event
	D04	R/W	Date	0x0	Date
					0	Disable the date event
					1	Enable the date event
	D03	R/W	Hour	0x0	Hour
					0	Disable the hour event
					1	Enable the hour event
	D02	R/W	Min	0x0	Minute
					0	Disable the minute event
					1	Enable the minute event
	D01	R/W	Sec	0x0	Second
					0	Disable the second event
					1	Enable the second event
	D00	R/W	Hsec	0x0	Hundredth of a second
					0	Disable the hundredth second event
					1	Enable the hundredth second event

E v e n t F l a g s r e g i s t e r

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Address: 9006 001C

The Event Flags register indicates that an event has occurred since the last reset. Read the register to determine the cause of the current active interrupt. This register is cleared when read (R/R in Access column).

Note that the Event Flags register can change even if the corresponding alarm enable bit is not set.

466Hardware Reference NS9215