Register Descriptions

Table 13-127. RFC Register Bit Description

31

 

 

0

 

 

 

RFC

 

 

 

 

Field

Bit(s)

Initial

Description

Value

 

 

 

 

 

 

 

RFC

31:0

0b

Number of receive fragment errors.

 

 

 

 

13.7.36Receive Oversize Count

ROC (040ACh; R)

This register counts the number of received frames with valid CRC field that passed address filtering, and were greater than maximum size. Packets over 1522 bytes are oversized if LongPack- etEnable (RCTL.LPE) is 0b. If LongPacketEnable is 1b, then an incoming packet is considered oversized if it exceeds 16384 bytes.

If receives are not enabled, this register does not increment. These lengths are based on bytes in the received packet from <Destination Address> through <CRC>, inclusively.

Table 13-128. ROC Register Bit Description

31

 

 

0

 

 

 

ROC

 

 

 

 

 

Field

Bit(s)

Initial

Description

 

Value

 

 

 

 

 

 

 

 

 

 

ROC

31:0

0b

Number of receive oversize errors.

 

 

 

 

 

 

13.7.37Receive Jabber Count

RJC (040B0h; R)

This register counts the number of received frames that passed address filtering, and were greater than maximum size and had a bad CRC (this is slightly different from the Receive Oversize Count register).

Packets over 1522 bytes are oversized if LongPacketEnable (RCTL.LPE) is 0b.

If LongPacketEnable is 1b, then an incoming packet is considered oversized if it exceeds 16384 bytes.

If receives are not enabled, this register does not increment. These lengths are based on bytes in the received packet from <Destination Address> through <CRC>, inclusively.

354

Software Developer’s Manual

Page 368
Image 368
Intel Intel Gigabit Ethernet Controllers, PCI Receive Oversize Count, Receive Jabber Count, ROC 040ACh R, RJC 040B0h R