Applications 1015
LD 97 - Defining Loss Switching mode.
Prompt Response Description
REQ: CHG
TYPE: SYSP IPE system parameters configuration
...
NATP YES Select North American transmission plan.
Note: The default to the NATP prompt is NO, and therefore this
prompt must always be checked during installation.
2. Define Loss Switching Class Of Service. Respond to the prompts in
LD 14 as shown.
LD 14 - Defining Loss Switching Class Of Service.
Prompt Response Description
REQ: CHG
TYPE: COT
XTRK XCOT
SIGL LOP
...
CLS LOL LOL=Long Line
Note: The XFCOT uses the CLS Long Line (LOL) and Short
Line (SHL) for Loss Switching purposes and that the card and
trunk type is different from the XUT.
Equivalencies
The following equivalencies do apply:
•XFCOT COTSHL is equivalent with XUT COT TRC
•XFCOT COTLOL is equivalent with XUT COT NTC.
The entries TRC and NTC are no longer allowed for the Generic XFCOT.
Trunk to Trunkconnection
When any disconnect supervision is configured (CLS = BAT, BTS), the
Loop Start Trunk of the Generic XFCOT is marked as having disconnect
supervision and therefore follows the same rules as a Ground Start Trunk.
There is no configuration involved for this operation.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.