Installation and configuration 221
equipment through the switch software, the T1 channel number must be
cross-referenced to the corresponding card unit number. This mapping is
shown in Table102 "DX-30 to T1 time slot mapping" (page 221).
Table102
DX-30 to T1 time slot mapping
TN T1 Channel Number
Motherboard 01
Motherboard 12
Motherboard 23
Motherboard 34
Motherboard 45
Motherboard 56
Motherboard 67
Motherboard 78
Motherboard 89
Motherboard 910
Motherboard 10 11
Motherboard 11 12
Motherboard 12 13
Motherboard 13 14
Motherboard 14 15
Motherboard 15 16
Daughterboard 017
Daughterboard 118
Daughterboard 219
Daughterboard 320
Daughterboard 421
Daughterboard 522
Daughterboard 623
Daughterboard 724
Disconnect supervision
The Lineside T1 card supports far-end disconnect supervision by opening
the tip side toward the terminal equipment upon the system’s detecting a
disconnect signal from the far-end on an established call. The Supervised
Analog Line feature (SAL) must be configured in LD 10 for each Lineside T1
port. At the prompt FTR, respond:
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23May 2008
Copyright© 2003-2008, Nor tel Networks
.