1022 NTDK20 Small System Controller card
Figure 287
NTDK99A single-port 100BaseT IP daughterboard
Table424
Expansion daughterboards
Daughterboard Number
of ports Cable type
Max. distance between Call
Server and Media Gateway
systems
NTDK99 (used in
Media Gateway) one
NTDK83 (used in
Call Server two
Use the supplied
NTTK34AA UTP
CAT 5 RJ-45 2 m
cross-over cable to
connect the Call Server
and Media Gateway
using the 100BaseT
daughterboards.
The NTTK34AA
cross-over cable must
be used if connecting
point-to-point.
Media Gateways can be located
upto 100m (328ft.) from the Call
Serverif connected point-to-point,
or up to 40 km (24 miles) from
the Call Server if a third party
converter is used to convert to
fiber.
Note: If not connecting point-to-point, connect the Call Server andMedia Gatewayusing a straight-through Ethernet UTP Cat 5 cable.Call Servers can be connected to Media Gateway in the following ways:•Use 100BaseT to connect to the LAN for voice distribution over a datanetwork.•Use 100BaseT cable if connected point-to-point (directly) to the MediaGateway. The NTTK34AA crossovercable must be used. The MediaGatewayscan be located up to 100 meters from the Call Server.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.