286 NT5D33 and NT5D34 Lineside E1 Interface cards
or more cards to the MMI" (page 287). Cards can be located in up to 15
separate IPE shelves. Start with any card slot in the IPE shelf and connect
to any other card slot. Connected card slots do not need to be consecutive.
Procedure 14
Connecting two or more LEIs to the MMI terminal
Step Action
Follow this procedure forconnecting two or more LEIs to the MMI terminal:
1Cable the DB9 male connector labeled "P5" (toward MMI terminal)
to one of the COM ports on the back of any TTY,a PC running a
terminal emulation program, or a modem.
2Make the connection from the first card to the second card by
plugging the DB9 female connector labeled "P4" (away from MMI
terminal) from the first card into the DB9 male connector of the
second card labeled "P5" (toward MMI terminal).
3Repeat step 2 for the remaining cards.
4At the last card of the daisy chain, make no connection from the DB9
female connector labeled "P4" (awayfrom MMI terminal).
5If two LEIs are too far apart to connect the "P4" and "P5" connectors
connect them with an off-the-shelf DB9 female to DB9 male
straight-through extension cable,available at any PC supply store.
—End—
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.