Physical description 811
The SDI paddle board is compatible with all existing system software, but
can only be used with the Meridian 1 system options listed above. It does
not support 20 mA current loop interface.
Physical description
The NT8D41AA Serial Data Interface paddle board is a printed circuit board
measuring 31.12 by 12.7 cm (12.25 by 5.0 in.). See Figure 266 "NT8D41AA
SDI paddle board" (page 812).
Up to two paddle boards can be used in a system backplane for a total
of four serial ports. Up to 12 other serial ports can be added by plugging
standard serial cards into standard system slots. The two serial por ts on
each card are addressed as a pair of consecutive addresses (0 and 1, 2
and 3, up to 14 and 15).
The front edge of the card hastwo serial por t connectors, an Enable/Disable
switch (ENB/DIS), and a red LED.The LED indicates that the card has been
disabled. It is lit when the following occurs:
•the ENB/DIS switch is set to disable
•both ports are disabled in software
•the ports are not configured in the configuration record
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23May 2008
Copyright© 2003-2008, Nor tel Networks
.