Toneand digit switch cards 79
****
5Testan automatically identified outward dialing (AIOD) trunk card:
LD 41
AIOD l s c loop, shelf, and card numbers
If the system response is other than OK, see Software Input/Output
Reference — Administration (NN43001-611) to analyze the
messages.
6End the session in LD 41:
****
—End—
Tone and digit switch cards
Procedure 11
Testingtone and digitswitch cards
Step Action
Use this procedure to test a tone and digit switch (TDS) card or totest the
TDS function of an NT8D17 Conference/TDS card.
1Log into the system:
LOGI (password)
2Obtain a list of terminal numbers (TNs) for disabled TDS cards:
LD 34
STAD
3If the TDS loop to be tested is disabled, enable it.
For an NT8D17 Conference/TDS card, enter:
ENLX loop
(the TDS/MFS loop is the evenloop of the conference/TDS loop pair)
Note: The conference/TDS card is not enabled automatically
when it is inserted. You must enable the card with the command
ENLX. (This command is used in LD 34 and LD 46 to address
even loops and in LD 38 to address odd loops.) Enabling the
loops with the command ENLL does not enable the hardware
for the card.
Forother than an NT8D17 Conference/TDS card, enter : ENLL loop
4Testthe TDS loop:
TDS loop
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.