218 NT5D11 and NT5D14 Lineside T1 Interface cards
Figure 38
Lineside T1 card - connecting two or more cards to the MMI
—End—
Terminal configuration
For the MMI terminal to be able to communicateto the Lineside T1 card, the
interface characteristics must be configured to the following:
•Speed – 1200 or 2400 bps, depending on the setting of switch position 1
of Switch 1
•Character width – 8 bits
•Parity bit – none
•Stop bits – one
•Software handshake (XON/XOFF) – off
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.