Physical description 175
The STATUSLED indicates that the Lineside T1 card has successfully
passed its self test, and is functional. When the card is installed, this LED
remains lit for two to five seconds as the self-test runs. If the self-test
completes successfully,the LED flashes three times and remains lit. When
the card is configured and enabled in software, the LED goes out. If the
LED flashes continuously,or remains weakly lit, replace the card.
Figure 29
Lineside T1 card - faceplate
Note: The STATUS LED indicates the enabled/disabled status of both
card slots of the Lineside T1 card simultaneously. Toproperly enable
the card, both the motherboard and the daughterboard slots must be
enabled. The STATUS LED turns off as soon as either one of the
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23May 2008
Copyright© 2003-2008, Nor tel Networks
.