522 NT8D02 and NTDK16 Digital Line cards
Table199
Digital line card-power required
Voltage Current (max.)
±5.0 V dc 150 mA
+15.0 V dc 1.6 Amp
–15.0 V dc 1.3 Amp
The digital line card needs +15V DC over each loop at a maximum current
of 80 mA. It requires +15V, -15V,and +5V from the backplane. The line
feed interface can supply powerto one loop of varying length up to 1070 m
(3500 ft) using 24 AWG wire with a maximum allowable AC signal loss of
15.5 dB at 256 kHz, and a maximum DC loop resistance of 210 ohms; 26
AWG wire is limited to 745 m (2450 ft).
The digital line card provides +15 V dc over each loop at a maximum current
of 80 mA. It requires +15 V,-15 V, and +5 V from the backplane. One
NT8D06 Peripheral Equipment PowerSupply ac or NT6D40 Peripheral
Equipment PowerSupply dccan supply power to a maximum of 16 digital
line cards.
Table200
Digital line card-power required
Voltage Current (max.)
±5.0 V dc 150 mA
+15.0 V dc 1.6 Amp
–15.0 V dc 1.3 Amp
The NT8D02 Digital Line Card provides +15 V dc over each loop at a
maximum current of 80 mA. It requires +15 V, -15 V,and +5 V from the
backplane. One NT8D06 Peripheral Equipment Power Supply ac or
NT6D40 Peripheral Equipment PowerSupply dccan supply powerto a
maximum of 16 digital line cards.
Table201
NT8D02 Digital Line Card - power requirements
Voltage Current (max.)
±5.0 V dc 150 mA
+15.0 V dc 1.6 Amp
–15.0 V dc 1.3 Amp
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.