492 NT7D16 Data Access card
Prompt Response Description
PRM (ON) OFF Prompt mode, where:
ON = prompt (Terminal) mode
OFF = no prompt (Host) mode
DEM (DCE) DTE Data Equipment mode
This prompt appears only if TYPE = R232.
DLNG (ENG) FRN Dataport language, where:
ENG = English
FRN = Quebec French
KBD (ON) OFF Keyboard dialing, where:
ON = enabled
OFF = disabled (Hayes dialing commands still work)
WIRE (OFF) ON Wire test mode, where:
OFF = disabled
ON = enabled
PBDO (OFF) ON Port busy upon DTR off, where:
OFF = disabled (port busy on with DTR)
ON = enabled (port busy off with DTR)
This prompt appears only if TYPE = R232
PBDO = OFF for any RS-232-C mode besides 8, or 12 If
PBDO = ON, key 7 = MSB
KEY Key settings
0 SCR xxxx
1 SCR xxxx
2 TRN
3 ADL yy xxxx
4 RGA
5 SCC 0-253
6 DSP
7 MSB
Primary data DN
Secondary Data DN
Call Transfer
Autodial
Ring Again
Speed Call Controller, list number
Display
Make Set Busy
Primary and secondary data DNs must be single
appearance DNs. Feature key assignment must be as
shown here.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.