Technicalsummary 521
Characteristics Description
Loop limits 0 to 1067 m (3500 ft.) with 24 AWG
PVC cable (±15 V dc at 80 mA)
Maximum ac Signal loss 15.5 dB at 256 KHz
Maximum dc Loop resistance 210 ohms
Transmitter output voltage:
successive "1" bits +1.5 ± 0.15 V and –1.5 ± 0.15 V
"0" bits 0 ± 50 mV
Table244 "Environmental specifications" (page 684) provides specifications
for the 16 digital line interfaces, and Table200 "Digital line card-power
required" (page 522) lists the maximum power consumed by the NT8D02
Digital Line Card.
Table198
NT8D02 Digital Line Card - line interface unit electrical characteristics
Characteristics Description
Units per card 16 voice, 16 data
Line rate 512 kbps ± 100 ppm
Impedance 100ohms
Loop limits 0 to 1067 m (3500 ft.) with 24 AWG
PVC cable (±15 V dc at 80 mA)
Maximum ac Signal loss 15.5 dB at 256 KHz
Maximum dc Loop resistance 210 ohms
Transmitter output voltage:
successive "1" bits +1.5 ± 0.15 V and –1.5 ± 0.15 V
"0" bits 0 ± 50 mV
Power requirements
The digital line card needs +15V DC over each loop at a maximum current
of 80 mA. It requires +15V, -15V,and +5V from the backplane. The line
feed interface can supply powerto one loop of varying length up to 1070 m
(3500 ft) using 24 AWG wire with a maximum allowable AC signal loss of
15.5 dB at 256 kHz, and a maximum DC loop resistance of 210 ohms; 26
AWG wire is limited to 745 m (2450 ft).
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.