20 Overview
Figure 1
IPE line cards shown installed in an NT8D37 IPE module
When installing line cards, follow these general procedures:
Step Action
1Configure the jumpers and switches on the line card (if any) to meet
system needs.
2Install the line card into the selected slot.
3Install the cable that connects the backplane connector onthe IPE
module to the module I/O panel.
4Connect a 25-pair cable from the module I/O panel connector to the
Main Distribution Frame (MDF).
5Connect the line card output to the selected terminal equipment
at the MDF.
6Configure the individual line interface unit using the Analog
(500/2500-type) TelephoneAdministration program LD 10 for analog
line interface units and Multi-line TelephoneAdministration program
LD 11 for digital line interface units.
—End—
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.