496 NT7D16 Data Access card
Segment 1
Step Action
1Leave cable E as is in slot L4.
2Move cable end F-3 to L5-3.
3Remove cable G from the backplane and connect ends G-1, G-2,
and G-3 to L6-1, L6-2, and L6-3.
4Add cable H to the I/O panel by connecting ends H-1, H-2, and H-3
to L7-1, L7-2, and L7-3.
—End—
Segment 2
Step Action
1Leave cable K as is in slot L8.
2Move cable end L-3 to L9-3.
3Remove cable M from thebackplane and connect ends M-1, M-2,
and M-3 to L10-1, L10-2, and L10-3.
4Add cable N to the I/O panel by connecting ends N-1, N-2, and N-3
to L11-1, L11-2, and L11-3.
—End—
Segment 3
Step Action
1Leave cable R as is in slot L12.
2Move cable end S-3 to L13-3.
3Remove cableT from the backplane and connect ends T-1, T-2, and
T-3 to L14-1, L14-2, and L14-3.
4Add cable U to the I/O panel by connecting ends U-1, U-2, and U-3
to L15-1, L15-2, and L15-3.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.