Nortel Networks 311 D-channel interface

1072 NTRB21 DTI/PRI/DCH TMDI card
combinations each for Mu255 to Mu255, Mu255 toA-Law, A-Law to Mu255,
and A-Law to A-Law. These values are selected to meet the EIA loss and
level plan.
Table437
Digital pad values and offset allocations
Offset PAD set 0 PAD set 1
00dB –7db
12dB –8db
23dB –9db
34dB –10db
45dB 0.6db
56.1dB 7db
68dB 9db
7–1dB 10db
8–3dB 11db
9–4dB 12db
A idle code, 7F 3db
B unassignedcode, FF 14db
C 1dB spare
D –2dB spare
E –5db spare
F –6db spare
D-channel interface
The D-channel interface is a 64 kbps, full-duplex, serial bit-stream
configured as a Data Circuit-terminating Equipment (DCE) device. The
data signals include:
•receive data output
•transmit data input
•receive clock output
•transmit clock output
The bit rate of the receive and transmit clocks can vary slightly from each
other. This is determined by the transmit and receive carrier clocks.
Feature selection through software configuration forthe D-channel includes:
•56 kbps
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.