420 NT7D16 Data Access card
IntroductionThe NT7D16 Data Access card (DAC) is a data interface card that integrates
the functionality of the QPC723A RS-232 4-Port Interface Line card
(RILC) and the QPC430 Asynchronous Interface Line card (AILC). This
combination allows the NT7D16 DACto work with the RS-232-C interface,
the RS-422 interface, or both.
The DACsuppor ts upto six ports, each capable of operating inRS-232-C or
RS-422 mode. Each port supports its own parameters that, once configured
and stored in the system database memory,are downloaded to the card.
Youcan install this card in any IPE slot.
Features Light Emitting Diodes (LEDs) indicate the status of the card, the call
connection, and the mode (RS-232-C or RS-422) the DAC is operating in. A
push-button toggle switch allows youto scan all six ports and monitor the
activity on each port.
The DAC supports the following features:
•Asynchronous and full duplex operation
•Keyboard dialing
•Hayes dialing
•Data terminal equipment (DTE)/data communication equipment (DCE)
mode selection
•Modem and gateway connectivity in DTE mode
•Terminaland host connectivity in DCE mode
•Forced or normal DTR
•Hotline
•Remote and local loopback testing
•Virtual leased line mode
•Inactivity timeout
•Wire test mode
•Self diagnostics
•Inbound modem pooling with any asynchronous modems
•Outbound modem pooling using "dumb" modems
•Outbound modem pooling using auto dialing modems
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.