Specifications 473
— 60 minutes
•DDN: 1 to 7 digits (0–9)
Operating parameters
There are thirteen parameters configured in the system that are downloaded
to the DAC.They are:
•Dialogue parity
— Space (OFF)
— Mark (ON)
—Even
— Odd
•DTR control
— Dynamic (affected by call progress)
— Forced ON
•DCD control
— Dynamic (affected by call progress)
— Forced ON
•Dialing mode
— Manual (user initiates the call with dialogue commands)
— Hotline (call the Autodial number upon connection)
•Wire test
— Disabled (can be invokedonly with front panel switch)
— Enabled (start only if the DAC firmware is idle)
•Language
— English
— Quebec French
•Keyboard dialing
— Enabled (allow both keyboard or Hayesdialing modes)
— Disabled (Hayes dialing only)
•Make port busy
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.