902 NTAK102.0 Mb DTI card
Various 2MB DTI switchableoptions exist on the NTAK10. These are:
Switch Off
(Switch Open) On
(Switch Closed)
S1-1 --
S1-2 CC Enabled CC Disabled
S2-1 120 ohm 75 ohm
S2-2 75 ohm 120 ohm
S3-1 non-French Firmware French Firmware
S3-2 --
Note: The ON position for all the switchesis towards the bottom of the
card. This is indicated by a white dot printed on the board adjacent to
the bottom left corner of each individual switch.
Various 2MB DTI switch options existon the NTAK10. These are shown in
Table369 "2 MB DTI switch options" (page 902).
Table369
2 MB DTI switch options
Switch Off
(Switch Open) On
(Switch Closed)
S1-1 ——
S1-2 CC Enabled CC Disabled
S2-1 120 ohms 75 ohms
S2-2 75 ohms 120 ohms
S3-1 non-French Firmware French Firmware
S3-2 ——
Note: The ON position for all the switches is toward the bottom of the
card. This is indicated by a white dot printed on the board next to the
bottom left corner of each individual switch.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.