Connector pin assignments 781
The E and M Trunkcard brings the four analog trunks to the backplane
through a 160-pin connector shroud. External equipment connects to the
card at the back of the Media Gateway and Media GatewayExpansion
using a 25-pin connector. Telephone trunks connect to the E and M Trunk
card at the MDF using a wiring plan similar to that used for line cards.
A typical connection example is shown in Figure 253 "E and M Trunkcard -
typical cross connection example" (page 782). A list of the connections to
the E and M Trunkcard in the various 2-wire modes is shown in Table 299
"E and M Trunkcard - backplane pinouts for 2-wire modes" (page 780).A
list of the connections to the E and M Trunkcard in the various 4-wire modes
is shown in Table300 "E and M Trunk card - backplane pinouts for 4-wire
modes" (page 780). See Communication Server 1000M and Meridian 1
Large System Installation and Configuration (NN43021-310) for complete
I/O connector information and wire assignments for each tip/ring pair.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23May 2008
Copyright© 2003-2008, Nor tel Networks
.