Architecture 889
•controlling LEDs
•downloading LCAs
•monitoring errors and alarms
•detecting the change of state in TS0, and outputting TS0 data
•counting bipolar violations, slips, PLL alarms, frame-alignment errors,
and CRC-4 errors
•monitoring the status of frame alignment and multiframe alignment
•detecting and reporting of alarm indication signals (AIS)
•updating of per channel loopback registers
•controlling the far-end loopbackand digroup loopback functions
DS-30X microprocessor
The DS-30X is a utility processor,responsible for the following tasks:
•controlling the DS-30X interface
•receiving and decoding of messages and taking appropriate action
•transmitting TS16 messages to the TS16 microprocessor
•receiving TS16 messages from the TS16 microprocessor and passing
these messages to the A07
•providing the 19.2 Kbps serial interface tothe Card-LAN
•controlling LEDs
•downloading Local Calling Areas (LCAs)
•monitoring errors and alarms
•detecting the change of state in TS0, and outputting TS0 data
•counting bipolar violations, slips, PLL alarms, frame-alignment errors,
and CRC-4 errors
•monitoring the status of frame alignment and multiframe alignment
•detecting and reporting of alarm indication signals (AIS)
•updating of per channel loopback registers
•controlling the far-end loopbackand digroup loopback functions
Signaling interface
Interconnections
The external connection is through a 50-pin MDF connector with the
NTBK05 carrier cable A0394217.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.