288 NT5D33 and NT5D34 Lineside E1 Interface cards
All 30 E1 channels carried by the LEI are individually configured using
the analog (500/2500-type) TelephoneAdministration program LD 10.
Use Table123 "Card unit number to E1 channel mapping" (page 288) to
determine the correct unit number and Software Input/Output Reference —
Administration (NN43001-611) for LD 10 service-change instructions.
LEI circuitry routes 16 units (0 – 15) on the motherboard and 14 (0 – 13)
units on the daughterboard to 30 E1 channels. The motherboard circuit card
is located in the left card slot, and the daughterboard circuit card is located
in right card slot. For example, if installing the LEI into card slots 0 and 1,
the motherboard would reside in card slot 0 and the daughterboard would
reside in card slot 1. In order to configure the terminal equipment through
the switch software, the E1 channel number needs to be cross-referenced
to the corresponding card unit number. This mapping is shown in Table 123
"Card unit number to E1 channel mapping" (page 288).
Table123
Card unit number to E1 channel mapping
Item TN E1 Channel Number
Motherboard 01
Motherboard 12
Motherboard 23
Motherboard 34
Motherboard 45
Motherboard 56
Motherboard 67
Motherboard 78
Motherboard 89
Motherboard 910
Motherboard 10 11
Motherboard 11 12
Motherboard 12 13
Motherboard 13 14
Motherboard 14 15
Motherboard 15 17
Daughterboard 018
Daughterboard 119
Daughterboard 220
Daughterboard 321
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.