Nortel Networks 311 Senderized operation for DID and two-way loop DR trunks

638 NT8D14 Universal Trunkcard
Figure 190
Two-way,loop DR, tie trunk call connection sequence - outgoing call to far-end PBX
Senderized operation for DID and two-way loop DR trunks
Incoming calls
If the far-end is senderized, the near-end can operate in any mode:
Immediate Start (IMM), Delay Dial (DDL) or Wink (WNK) start, as assigned
at the STRI prompt in the TrunkAdministration program LD 14. See
Figure 191 "Two-way, loop DR, TIE trunk call states - incoming call through
senderized, tandem PBX from a CO/FX/" (page 640).
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.