Maintenance 409
Figure 106
MSDL states
A newly configured MSDL automatically enters the manually disabled state.
An operating MSDL can be manually disabled by issuing the DIS MSDL x
command in LD 37 (step 1 in Figure 106 "MSDL states" (page 409)).
Entering the DIS MSDL x command in LD 37 moves the card to manually
disabled status and stops all system communication with the card (step 5 in
Figure 106 "MSDL states" (page 409)).
Manually enabled
When the card has been manually disabled, re-enable it with the ENL MSDL
xcommand in LD 37 (step 2 in Figure 106 "MSDL states" (page 409)).
System disabled
When the system disables the MSDL card (step 4 in Figure 106 "MSDL
states" (page 409)), it continues to communicate and attempt maintenance
procedures on the card. To stop all system communication with the card,
enter DIS MSDL x to disable it (step 5 in Figure 106 "MSDL states"
(page 409)). Otherwise, the system periodically tries to enable the card,
attempting recovery during the midnight routines (step 3 in Figure 106
"MSDL states" (page 409)).
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.