384 NT6D71 UILC line card
to connect ISDN BRI-compatible terminals over Digital Subscriber Loops
(DSL) to the CS 1000. For more information on ISDN BRI, see "ISDN BRI"
(page 374).
A UILC can reside in a Media Gateway or Media GatewayExpansion. A
maximum of four UILCs are supported in a Media Gateway and Media
Gateway Expansion.
Physical description
The NT6D71 UILC is a standard-size circuit card. Its faceplate is equipped
with an LED to indicate its status.
The NT6D71 UILC is a standard size circuit card designed to be inserted
in peripheral equipment slots in the Meridian 1. Its faceplate is equipped
with an LED to indicate its status.
The NT6D71 UILC is a standard-size circuit card that inserts in slots in the
Media Gateway and Media GatewayExpansion. TheNT6D71 UILCcan be
installed in slots 1, 2, 3, and 4 of the Media Gateway and slots 7, 8, 9, and
10 of the Media Gateway Expansion.
The faceplate is equipped with an LED to indicate its status.
Power consumption
Power consumption is +5 V at 1900 mA.
Power consumption is +5V at 1900 mA.
Power consumption is +5 V at 1900 mA.
Functional description
Each U interface provides twoB-channels and one D-channel and suppor ts
one physical termination. This termination can be to a Network Termination
(NT1) or directly to a single U interface terminal. Usually, this physical
termination is to an NT1, which provides an S/T interface that supports up
to eight physical terminal connections. The length of a DSL depends on the
specific terminal configuration and the DSL wire gauge; however,it should
not exceed 5.5 km (3.3 mi).
The main functions of the UILC are as follows:
•provide eight ISDN U interfaces conforming to ANSI standards
•support point-to-point DSL terminal connections
•provide channel mapping between ISDN BRI format (2B+D) and system
bus format
•multiplex four D-channels onto one timeslot
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.