Operating modes 449
Mode of
operation Interface application Comments
Mode 6 Inbound and Outbound
Gateway access (with forced
DTR)
Inbound and Outbound Gateway protocol:
The DAC operation is identical to mode 4 except that
DTR is always forced ON (except during disconnect).
The establishment of the outbound call does not
require DCD to be driven ON by the Gateway.
Call disconnection:
Disconnection is identical to mode 4 except that when
a call is released, the DAC turns DTR OFF for 0.2
second and then ON. DTR stays ON until the next
call release.
Mode 7 Inbound Hotline Gateway
access (with forced DTR) Inbound Hotline Gateway protocol:
The DAC operation is identical to mode 5 except that
DTR is always forced ON (except during disconnect).
Call disconnection:
Disconnection is identical to mode 6.
Mode 8 Host access for call
origination and answering Host answering an incoming data call:
Local DM user dials the access number to initiate the
connection.
DAC responds by driving RI ON for 2 seconds and
OFF for 4 seconds until the Host answers by turning
DTRON. (If the Host alwaysdrives DTR ON, the DAC
immediately answers the call without driving RI ON.)
When Host receives RI ON, it should respond by
turning DTR ON.
DAC answers when it receives DTRON.
DAC turns DSR, DCD, and CTS ON when the call is
completely established. The local DM user is now
transparently linked to the Host.
Host originating a data call:
Host turns DTR ON to initiate the connection.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23May 2008
Copyright© 2003-2008, Nor tel Networks
.