Architecture 949
•provide jitter filtering
•make use of an algorithm to aid in detecting crystal aging and to qualify
clocking information
The NTAK79clock controller functions and features include:
•phase lock to a reference, generate the 10.24 MHz system clock, and
distribute it to the CPU through the backplane. Up to two references at
a time are accepted
•primary to secondary switchover (auto-recovery is provided)
•prevent chatter
•error burst detection and correction, holdover, and free running
capabilities
•compliance with 2.0Mb CCITT specifications
•software communication
•jitter filtering
•use of an algorithm to detect crystal aging and to qualify clocking
information
Reference switchover
Switchover may occur in the case of referencedegradation or reference
failure. When performance of the reference degrades to a point where
the system clock is no longer allowed to followthe timing signal, then the
reference is said to be out of specification. If the reference being used is
out of specification and the other reference is still within specification, an
automatic switchover is initiated without software intervention. If both
references are out of specification, the clock controller provides holdover.
Switchover may occur in the case of referencedegradation or reference
failure. When performance of the reference degrades to a point where
the system clock is no longer allowed to followthe timing signal, then the
reference is said to be out of specification. If the reference being used is
out of specification and the other reference is still within specification, an
automatic switchover is initiated without software intervention. If both
references are out of specification, the clock controller provides holdover.
See "Reference switchover"(page 914).
Autorecovery and chatter
If the software command "track to primary" is given, the clock controller
tracks to the primary reference and continuously monitors the quality of
both primary and secondary references. If the primary becomes out of
specification, the clock controller automatically tracks to secondary provided
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.