Configuring the Data Access card 491
Prompt Response Description
OPE (NO) YES Operation parameter change
PAR (SPAC) ODD EVEN
MARK SPAC = space parity
ODD = odd parity
EVEN = even parity
MARK = mark parity
DTR (OFF) ON DTR settings, where:
ON = forced DTR
OFF = dynamic DTR
This prompt appears only if TYPE = R232
HOT (OFF) ON Hotline
If HOT = ON, then AUTB = OFF
AUT (ON) OFF Automatic answer
AUTB (ON) OFF Autobaud
Prompt appears only if HOT - OFF
BAUD 0-(7)-8 Baud rate, where:
0 = 110
1 = 150
2 = 300
3 = 600
4 = 1200
5 = 2400
6 = 4800
7 = 9600
8 = 19200
This prompt appears only if AUTB = OFF.
DCD (ON) OFF DCD settings, where:
ON = dynamic DCD
OFF = forced DCD
This prompt appears only if TYPE = R232.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23May 2008
Copyright© 2003-2008, Nor tel Networks
.