Installing a circuit card 67
DANGER
Toavoid personal injury and equipment damage, read all of the
guidelines in "Circuit and installation" (page 62) before you begin
installation and follow all guidelines throughout the procedure.
Procedure 2
Installing a circuit card
Step Action
1Open the protective carton and remove the circuit card from the
antistatic bag. Return the antistatic bag to the carton and store it
for future use.
2Inspect the card components, faceplate, locking devices,and
connectors for damage. If damaged, tag the card with a description
of the problem and package it for return to a repair center.
3Refer to the work order to determine the module and slot location
for the card.
4If there is an enable/disable (Enb/Dis) switchon the faceplate, set it
to Dis.
5If there are option switches or jumpers on the card, set them
according to the work order (see "Option settings" (page 81)).
CAUTION
System Failure
Incorrectly set switches on common equipment circuit
cards may cause a system failure.
6Squeeze the ends of the locking devices on the card and pull
the tabs away from the latch posts and faceplate (see Figure 16
"Installing the circuit card in the card cage" (page 68)).
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23May 2008
Copyright© 2003-2008, Nor tel Networks
.