78 Acceptance tests
Procedure 9
Testinga trunk card using a maintenance telephone
Step Action
1Access the system from a maintenance telephone.
See "Communicating with the Meridian 1" in the Software
Input/Output Reference — Administration (NN43001-611) fordetails
on accessing the system from a maintenance telephone.
2Testthe trunk unit:
LD 36
TRKlsculoop, shelf, card, and unit numbers
3If the maintenance telephone is hooked up to a monitor and the
system response is other than OK, see Software Input/Output
Reference — Administration (NN43001-611) to analyze the
messages.
—End—
Procedure 10
Testinga trunk card using a system terminal
Step Action
1Log into the system:
LOGI (password)
2Enter:
LD 36
3Totest a trunk from a remote test center, seize a central office (CO)
monitor trunk:
CALL
or
CALL l s c u
Seize the automatic number identification (ANI) trunk: TRK l s c
uloop, shelf, card, and unit numbers
When you see the DN? prompt, enter the directory number (DN) you
want the system to dial.
If the system response is other than OK, see the Software
Input/Output Reference — Administration (NN43001-611) to analyze
the messages.
4End the session in LD 36:
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.