Nortel Networks 311 Hayes dialing

462 NT7D16 Data Access card
C - Call M - Modify
D - Display
CTRL Z (Abort Keyboard Dialing)
Select: <SP>
Not in service
When the DAC attempts a call to a DN that is not supported, it sends you
a message. The call is released, and you must reenter the Autobaud
character <CR> to initiate keyboard dialing again.
C<CR>
ENTER NUMBER:<SP>
xxxxxxx<CR>
CALLING xxxxxxx
NOT IN SERVICE
RELEASED
No response from the system
Likewise, when the DACreceives no system response from your por t after
a 30-second timeout period, the DAC sends you a message. The call is
abandoned. This means the port is either disabled or unequipped.
C<CR>
ENTER NUMBER:<SP>
xxxxxxx<CR>
NO SYSTEM RESPONSE
RELEASED
Hayes dialing
Like keyboard dialing, Hayesdialing is an interactive dialing mode with the
terminating equipment connected to the NT7D16 Data Access Card (DAC).
In addition to the common parameters and functions, the Hayes dialing
mode offers the following features:
•Data call dialing
•Twomodes for answering incoming calls: auto and manual
•Repeat previous command
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.