Architecture 885
•per-channel and all-channel loopback capabilities for near-end and
far-end
•self-test
•download of incoming ABCD validation times from software
•warm SYSLOAD (TS16 AS16 transmitted)

Applicability to France

Features specific to DTI requirements for France are implemented in
firmware, and are switch-accessed. These are:
•transmission and reception of alarm indication signaling (AIS) in TS16
such as card disabled and warm SYSLOAD
•France-specific PPM counting
•decadic dialing
•France-specific alarm report and error handling
Features specific to DTI requirements for France are implemented in
firmware, and are switch-accessed. These are as follows:
•transmission and reception of alarm indication signaling (AIS) in TS16
(card disabled, warm SYSLOAD,etc.)
•France-specific PPM counting
•decadic dialing
•France-specific alarm report and error handling
Features specific to DTI requirements for France are implemented in
firmware, and are switch-accessed. These are:
•transmission and reception of alarm indication signaling (AIS) in TS16
such as card disabled and warm SYSLOAD
•France-specific PPM counting
•decadic dialing
•France-specific alarm report and error handling
ArchitectureThe main functional blocks of the NTAK10 card architecture include:
•DS-30X interface
•signaling interface
•three microprocessors
•digital pad
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright© 2003-2008, Nor tel Networks
.