5-9
Automated Verification – Option 011
Step 3. Device Verification
3Press CONTINUE to run the test:
•If you switched the record function off, you have to press CONTINUE after
each S-parameter measurement.
•If you switched the record function on, the test displays and prints the pass/
fail information for the S-parameter measurements that are valid for system
verification.
4When the analyzer finishes all the measurements, connect the 50 dB attenuator
(supplied in the verification kit), as shown in Figure 5-5.
Figure5-5. Connections for the 50 dB Verification Device
5Press RETURN, TESTS, 29, x1, EXECUTE TEST, CONTINUE.