4-31
Performance Tests
8. Test Port Crosstalk
Crosstalk to Test Port 2 from 300 kHz to 3 GHz
4Press START, 300, k/m, STOP, 3, G/n.
5Press MEAS, Trans: E/E S21 FWD.
6Press SCALE REF, REFERENCE VALUE, –100, x1.
7Press MENU, TRIGGER MENU, SINGLE.
8Press MARKER FCTN, MARKER MODE MENU, MKR SEARCH, SEARCH: MAX.
9Write the marker value (which appears on the analyzer display) in the
“Performance Test Record.”
Crosstalk to Test Port 1 from 300 kHz to 3 GHz
10 Press MEAS, Trans: E/E S12 REV.
11 Press MENU, TRIGGER MENU, SINGLE.
12 Press MARKER FCTN, MARKER MODE MENU, MKR SEARCH, SEARCH: MAX.
13 Write the marker value (which appears on the analyzer display) in the
“Performance Test Record.”
14 This completes the “Test Port Crosstalk” performance test if your analyzer
does not have Option 006. Otherwise, proceed to the next section.
Crosstalk to Test Port 1 from 3 GHz to 6 GHz
15 Press START, 3, G/n, STOP, 6, G/n.
16 Press MENU, TRIGGER MENU, SINGLE.
17 Press MARKER FCTN, MARKER MODE MENU, MKR SEARCH, SEARCH: MAX.
18 Write the marker value (which appears on the analyzer display) in the
“Performance Test Record.”
Crosstalk to Test Port 2 from 3 GHz to 6 GHz
1Press MEAS, Trans: E/E S21 FWD.
2Press MENU, TRIGGER MENU, SINGLE.
3Press MARKER FCTN, MARKER MODE MENU, MKR SEARCH, SEARCH: MAX.
4Write the marker value (which appears on the analyzer display) in the
“Performance Test Record.”