1-21
Installing the Agilent 8702D
Step 13. Check the Operation (Option 011)
Step 13. Check the Operation (Option 011)An Agilent 85047A S-parameter test set must be used when making measure-
ments.
1Turn off the LINE power switch. Then, turn back on the LINE power switch.
2Locate the serial number and configuration options shown on the display.
Compare them to the shipment documents.
3Press PRESET, and observe that the analyzer is operating properly as shown in
Figure 1-17.
Figure1-17. Checking the Operation (Option 011)
4Connect the equipment as shown in Figure 1-18.