6-22
Performance Tests – Option 011
7. Receiver Magnitude Frequency Response
3Press PRESET, MARKER, MEAS, INPUT PORTS, R, MENU, POWER, 6, x1.
4Press CW FREQ, 300, k/m. Set the calibration factor on the power meter for this
CW frequency.
5Write the power meter reading on the “Performance Test Record.”
6Write the marker reading, which appears on the analyzer display, in the “R
Input Power” column of the “Performance Test Record.”
7Repeat Step 4 through Step 6 for the other CW frequencies listed on the
“Performance Test Record.”
Input A Magnitude Frequency Response
8Connect the equipment as shown in Figure 6-10.
Figure6-10. Magnitude Frequency Response Test Setup (Receiver Input A)
9Press MEAS, INPUT PORTS, A, MENU to measure the power at the receiver input A
channel.
10 Press CW FREQ, 300, k/m.
11 Write the marker reading, which appears on the analyzer display, in the
“A Input Power” column of the “Performance Test Record.”
12 Repeat Step 10 and Step 11 for the other CW frequencies listed on the
“Performance Test Record.”